• Correctly and quickly to read the testing cable configuration.
• Test cable: RJ45(UTP/STP) , USB , RJ11/RJ12 , BNC , COAXIAL , RCA and modular cables.
• Following standards : EIA/TIA 568A/568B , AT&T 258A , ISDN , 10 BASE-T, 100 BASE-TX , Token Ring , etc.
• Operation with AUTO scan or step by step (TEST) mode.
• Accessories : RJ45(M/M) cable x 1 , RJ45-BNC(F) adapter cable x 2 , BNC(M/M) adapter x 1 , RJ45-RJ11/RJ12 adapter x 2 and leather pouch x 1.
• Select accessories : (1) RJ45-COAXIAL(F) adapter cable x 2 , COAXIAL(M/M) adapter x 1 (2) RJ45-RCA(F) adapter cable x 2.
  

• Correctly and quickly to read the testing cable configuration.
• Test Cable: RJ45 (UTP/STP), RJ11, BNC, COAXIAL, RCA and modular cable.
• Following standards: EIA/TIA 568A/568B, AT&T 258A, ISDN, 10 BASE-TX, TOKEN.
• Operation with Auto scan mode and GND mode.

Features

• All-in-one network tester / tone generator / pin-by-pin cable tester.
• Detects network speed (10/100/1000 Mbps) of an active OR inactive network.
• Flashes the network hub/NIC port light of the cable tested to identify port number.
• Loopback or remote, automatic and manual testing of cables up to 8 pins.
• Remote unit included for testing already-installed cables.
• Coaxial F adaptor included for testing coaxial cables.
• Built-in tone generator helps track a cable to its destination.

Description

The Lantracker is a network tester, pin-by-pin cable tester, and tone generator all in one. As a network tester, it detects whether a network is active or inactive and displays network speed (10/100/1000 Mbps) in either case. It also flashes the network hub or NIC’s port light corresponding to the cable it is connected to, to show the cable’s port number. As a cable tester, it performs loop-back or remote tests of network, data, voice, and coaxial cables, displaying the results on a pin-by-pin LED display which moves from pin to pin automatically or manually. The Lantracker can be used to test cable or shield integrity, testing network function and speed, and tracing cable using its tone generator function (tone probe not included). Includes an adaptor for testing coaxial-F cable. Uses 9V battery.

Features

• All-in-one network tester / tone generator / pin-by-pin cable tester.
• Detects network speed (10/100/1000 Mbps) of an active OR inactive network.
• Flashes the network hub/NIC port light of the cable tested to identify port number.
• Automatic and manual pin-by-pin tests of cable up to 8 pins.
• Manual pin-by-pin test may go forward or backward through pins at user’s option.
• Remote unit included for testing already-installed cables.
• Coaxial F adaptor included for testing coaxial cables.
• Built-in tone generator helps track a cable to its destination.
• Line tester checks circuit polarity and AC/DC voltage to prevent damage to tester.

Description

The Lantracker is a network tester, pin-by-pin cable tester, and tone generator all in one. As a network tester, it detects whether a network is active or inactive and displays network speed (10/100/1000 Mbps) in either case. It also flashes the network hub or NIC’s port light corresponding to the cable it is connected to, to show the cable’s port number. As a cable tester, it performs loop-back or remote tests of network, data, voice, and coaxial cables, displaying the results on a pin-by-pin LED display which moves from pin to pin automatically or manually. The Lantracker can be used to test cable or shield integrity, testing network function and speed, and tracing cable using its tone generator function (tone probe not included). Includes an adaptor for testing coaxial-F cable. Uses 1 9V battery.

Features

• A network tester, tone generator, cable tester, and port ID finder all in one.
• Remote unit lets you test installed cables and patch cables pin-by-pin.
• Line tester detects circuit voltage to prevent damage to tester.
• Office ID feature allows user to check ID number of up to 100 cables or outlets (remote ID terminators included).
• Tone generator transmits a signal detectable by any market tone probe.
• Network tester blinks the network hub/NIC port light for the cable being tested.
• Identifies network activity and speed (10/100/1000 Mbps).
• Includes remote ID terminators with ID rack for safe storage.

Description

The One For All is an all-in-one network tester, tone generator, cable tester, and port ID finder. It comes with a remote unit, allowing pin-by-pin tests of installed cables in addition to patch cables. The office ID feature allows the user to check the ID number of up to 100 networks or patch panel outlets without labeling the cables manually, and the tone generator traces cable using a tone detectable by any market tone probe. The network tester blinks the network hub or NIC port light for the cable being tested, allowing easy cable and outlet identification; and it identifies network speed (10 Mbps vs. 10/100 Mbps vs. 10/100/1000 Mbps) and activity. Use the included ID rack to arrange remote ID terminators in order for easy access and safekeeping. Line tester included for detect live circuits and preventing damage to the tester.

Features

• Plug in both ends of a cable and the tester gives instant results, buttons-free.
• Remote unit lets you test installed cables
• Tests shielded and unshielded network, telecom, and crossover cables.
• Easy-to-read LED display shows cable type and faults.
• Pin-by-pin results can be read at the remote unit.
• LED displays shielding check results, battery low indicator.
• Remote unit tests telephone line polarity and performs voltage test to protect the tester from damage by live circuits.

Description

The Plug ‘N’ Check is an affordable and simple tester for datacom, telecom, and coaxial cables that doesn’t require a professional knowledge of cable design or interpreting a complex display.
Simply plug in both ends of a cable, and the easy-to-read LED display explains the cable type and checks whether the cable is good or faulty. Find shorts, opens, miswiring, and reversed wiring. Or perform a remote test using both units, and read the pin-to-pin configuration at the remote unit. A line tester on the remote unit lets you check phone line polarity, and detect voltage on the line before it threatens the main test unit.
A shield LED shows results of the shielding check and battery low indicator prevents inaccurate readings from low batteries. The Plug ‘n’ Check makes work shorter and easier for the layman and the professional alike. Especially suited the for installation and maintenance of residential networks. Uses 1 9V alkaline battery. Provides a tone generator for tracing cable with a Net Probe (not included).

Features

• A cable tester, tone generator, and tone tracer all in one.
• Tests shielded or unshielded RJ45, RJ12 and RJ11 cables, and coaxial BNC cable using included adaptor.
• Tests cables for opens, shorts, reversed wiring, and miswiring; tests cable shielding for continuity.
• Features remote terminator for testing of installed cables; main unit displays TX and RX results, remote unit displays RX results.
• Remote terminator has built-in tone tracer and allows testing of installed cables.
• Features automatic scan and manual pin-by-pin testing.

Description

The Lancheck II combines the functions of an easy-to-use cable tester and a tone generator with tracer. It lets technicians locate and test the status of voice and data cables in a single step. No more fumbling around the toolbox for multiple tools and testers – the Lancheck II saves time and money, allowing network professionals to work more efficiently. Uses 1 9V battery.

Features

• Built-in tone generator, with a tone probe (not included), lets you trace cable.
• Performs automatic and manual loop-back and remote tests of unshielded and shielded twisted pair cable.
• Tests for continuity, shorts, opens, miswiring, and pin-to-pin configuration.
• Remote unit lets you test already installed wiring.
• Can test cables up to 2,000 ft. long.
• Comes with adaptors for testing 10 BASE-T, E1A/T1A 568 A/B, AT&T 258A, 100BASE-TX, TOKEN RING, TP-PMD, ISDN, USOC and BNC networks.

Description

The Pinscan combines the functions of an easy-to-use cable tester with those of a tone generator. This enhances the technician’s ability to quickly locate and verify the status of commonly-used voice and data cables. The tester performs loop-back and remote tests of unshielded and shielded twisted pair cable for continuity, opens, shorts, miswiring, and pin-by-pin configuration. Its low-emission frequency tone, when coupled with a net probe such as Pansco’s PR-06P, lets a technician quickly locate and isolate the test cable without manually tagging it. A remote unit allows the user to perform remote tests on installed cables. Its cable tests can be run automatically or manually, for the user’s convenience. The Pinscan comes with adaptors for testing 10 BASE-T, E1A/T1A 568 A/B, AT&T 258A, 100BASE-TX, TOKEN RING, TP-PMD, ISDN, USOC and BNC networks. An RJ-45 to RJ-45 patch cord is also included for testing patch panels and RJ-45 outlets. The remote unit features an RJ-45 jack and a voltage detector LED for line testing.

Features

• B- Features an instant button-free cable test, a pin-by-pin test, and a tone generator.
• Instant test’s “snapshot” feature matches each cable you plug in against a programmable memory.
• Automatic and manual pin-by-pin tests give cable configuration and detect opens, shorts, miswiring and reversed wiring.
• Remote unit lets you test installed cable; pin-by-pin results displayed at both ends.
• Tests shielded and unshielded twisted pair (UTP/STP) cable.
• Line test detects voltage, preventing damage to the tester.

Description

The Snapshot lets professionals and layman alike check cables instantly upon plug-in, with no buttons to press or displays to read. It simply checks each cable you plug in against a correctly-configured cable programmed by the user, and indicates if the cables match or differ with 2 alert sounds. (To program the memory, simply plug the cable in and press a button.) Automatic and manual cable tests display pin-by-pin results on an LED. Also features a tone generator which can be used with any tone probe (not included) to trace a cable to its source. Remote unit lets you test installed cables, and built-in line tester tests phone line polarity and detects line voltage before it threatens the safety of the test unit. A shield-test feature automatically tests cable shielding and a battery-low indicator prevents misreading results. Well-suited for the installation and maintenance of residential and commercial networks. Uses 1 9V battery.

Features

• Includes remote terminator for testing already-installed cable.
• Identifies opens, shorts, reversed wiring, and miswiring in shielded or unshielded cables.
• Tests cables up to 2,000 feet long.
• Automatic and manual cable testing.
• Built-in tone generator transmits a tone on any pin.
• Comes with RJ45 to RJ45 patch cord and adaptors for testing 10 BASE-T, EIA/TIA 568 A/B, AT&T 258A, 100 BASE-TX, TOKEN-RING, TP-PMD, ISDN, USOC and BNC networks.

Description

The LAN cable tester is a versatile, full-featured tool for testing many kinds of network cable. Loopback and remote tests may be performed automatically or manually, and will test cable continuity as well as identifying opens, shorts, reversed wiring, and miswiring in cables up to 2,000 ft. long. Shielded connectors allow the tester to test shielded twisted pair (STP) cables. The built-in tone generator generates a low emission frequency tone which can be detected by any market tone probe, making it easier to trace and locate cables. Uses 1 9V alkaline battery. CE Approved.

Features

• Network tester connects to the network hub or NIC, displays network status, network speed, and data transmission.
• Identifies full or half duplex capability.
• Flashes the network hub or NIC light of the test cable to show cable’s port number.
• Displays network activity and speed (10 Mbps vs. 100 Mbps)

Description

The PC-Hub Network Tester lets a technician quickly check Ethernet ports for features of the LAN devices they connect to, and troubleshoot during LAN installation and repair. It identifies active network link status, monitors data reception, and displays whether the outlet or cable leads to a network hub or NIC and whether the network is running at 10 or 100 Mbps. It also identifies whether the network has full or half duplex capabilities and flashes the network hub or NIC port light for the test cable.
The PC-Hub Tester automatically establishes a link with the hub or NIC and displays results on its dual-color LED. Note that this tester does not test 10/100/1000 Mbps (Gigaswitch) networks.

Features

• Tests all PC cables; RJ45, serial ATA, telecom, coaxial, USB, Firewire, and mini USB cables.
• Test base unit tests up to 36 pins.
• New PR-09PCF socket board now includes a socket for testing serial ATA cable.

Description

The Universal Cable Tester is a compact, stand-alone unit which gives technicians an affordable way to test PC, serial ATA, network, telecom, coaxial, USB A/B, mini USB A/B/AB, 1394 Firewire 4/6, and SCSI I, II, III, and V cables for continuity, wiring configuration, opens, shorts, miswiring, and cross-connected wires.
The Universal Cable Tester’s interchangeable socket boards let you test almost every type of cable simply by purchasing a new socket board, not a whole new tester. An easy-to read LED instantly shows whether connections are good or faulty. Ideal for computer technicians and hardware outlets. Powered by DC adaptor or 9V battery.
Note: If you purchase the SCSI or Ribbon tester, the base unit can test up to 80 pins, and you may change the socket board if you wish. However, the PC-Net cable tester’s base unit can only test 36 pins, and is not compatible with other test boards. CE approved.